Camburg Chevy/GMC 1500 2wd/4wd '07-17 FOX 2.5 Factory DSC Kit

Camburg Chevy/GMC 1500 2wd/4wd '07-17 FOX 2.5 Factory DSC Kit

Regular price $3,840.00 Sale

Each coil-over is designed to gain maximum wheel travel with an aftermarket upper arm all while keeping CV joints, tie rods, uni-balls and ball-joints in their working ranges. FOX now offers their standard Factory 2.5 remote reservoir version and for the ultimate combination their new DSC version. Both shocks have a 2.5″ diameter shock body for added oil capacity for aggressive use both on and offroad. Based on their race shocks, they are fully rebuild-able and revalve-able for optional tuning and maintenance. The remote external reservoirs increase the oil capacity for lower operating temperatures and the Dual Speed Compression (DSC) adjuster gives remarkable versatility and precise tuning. A simple twist of either two adjuster knobs allows twelve separate low-speed and ten high-speed compression levels. The integrated coil spring can be adjusted for preload and ride height and comes pre-set to level your vehicle right out of the box.

After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. The uniball upper arms address these issues and more. Replacing the stock ball-joint with a uni-ball bearing, wheel travel is increased with a part that is considerably stronger and will last longer under extreme conditions. The arms are engineered with more caster and adjusted the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling.

In the rear we go with a pair of FOX’s 2.0 Performance Series shocks. These shocks have a larger aluminum shock body which holds more oil for better shock performance offroad and have a firmer ride

  • 2.5″ Smooth bore and honed seamless alloy bodies
  • Zinc-plated and double-clear coated for long lasting finish
  • 2.5″ Smooth bore 6061-T6 Aluminum is hard anodized black reservoir
  • Eibach® racing springs
  • 7/8″ hardened NitroSteel® Steel carbon shafts
  • 6061-T6 hard-anodized, high flow aluminum pistons
  • PTFE-lined, heat-treated, alloy steel spherical bearings
  • Made in the USA